The brakes on my 1970 Ford one ton are open on the inside of the drum and I can't verbs the drum off. The fluid is already bled past its sell-by date. Please help.
Answers: Back sour the slack adjusters. Hopefully they are not frozen. Remove the plug from the backing plate. Insert a small flat screw driver & push hindmost on the actuator. Insert a larger screw driver & turn the slack adjuster in to slacken stale the shoes. If it's the rear axle, the axles must be pulled & bearing removed.
>>>>>>
Might be seized on the axle stub - spray it with WD40 and verbs the area near a wire brush. If its really discouraging, you might have to use boil to break it loose
Should i buy?! for those who kno...
Answers: Back sour the slack adjusters. Hopefully they are not frozen. Remove the plug from the backing plate. Insert a small flat screw driver & push hindmost on the actuator. Insert a larger screw driver & turn the slack adjuster in to slacken stale the shoes. If it's the rear axle, the axles must be pulled & bearing removed.
>>>>>>
What are 3 appropriate vehicle parts to...
Might be seized on the axle stub - spray it with WD40 and verbs the area near a wire brush. If its really discouraging, you might have to use boil to break it loose
Resolved Questions
- My 2002 Sentra's power door lock switch...
- What happen if you put power steering...
- My sports car radio, clock, and ambient...
- Car turns bad?
- 215/45R18? Low profile?
- Haw can i mak my own ...
- How much does it cost to install...
- Fuel Pump Problems?
- 05 Ford Escape have strange Vibration ??
- Check engine night light, on a investigational...