1990 Ford ranger turn signals. sustain.?

my 1990 ford ranger turn signals arn't working. my 4-ways work find but when i go to use my turn signals theres nothing. no lights come one at adjectives.help. i will take any philosophy

Ignition systems?

Check fuses.also could possibly be relay switch for blinkers. OR trouble next to steering column.

ML320 have power but with the sole...


I had a similar problem with my F-150 and it a short time ago turned out to be the flasher. CHEAP about $5.00. It was located surrounded by the fuse panel and was round about as big around as a quarter and sticks out roughly speaking 1/2 inch. Worth a shot

I be mudding and submerged my engine...



Answers:    yup, the fuse would be the first place to look.
I had a similar problem with my F-150 and it a short time ago turned out to be the flasher. CHEAP about $5.00. It was located surrounded by the fuse panel and was round about as big around as a quarter and sticks out roughly speaking 1/2 inch. Worth a shot

Turn signal surrounded by a 1999 Ford...


could be the flasher... but check the fuse for the turn signals first. They use different fuses.

What is an significant, simple and affordable...

you could start by checking the fuse, but if it just "stopped" working then i would suspect any the turn signal switch or wiring up to the turn signal switch. good luck
could be the flasher... but check the fuse for the turn signals first. They use different fuses.

DO i consume more gas while running...


Resolved Questions

Copyright © 2008-2010 All rights reserved. YesImAuto.com