Can you run 9.5:1 pistons next to a 11.1:1 camshaft?

How much should i settle a friend...

yes you could use that cam but you will have to obtain a converter that will match. you also won't have any low call a halt torque but sure would sound good, lopey that is to say. if this is a street car I recommend you choose another cam.

What's wrong beside my 2001 Dodge Stratus!!?


i now what u tight-fisted...best to call cam co.you may need differnt ratio rockers..they know what the cam should be used contained by...you might try summit racing...they have a tech stripe u can call..

Need to replace my parking brake shoes?



Answers:    EDIT:

Sure, you could run it. Are you building a drag car that needs lots of glorious RPM power?

If not, you'll hate it.

Notice it says 3000-7000 RPM on the power array. The car will be an absolute dog on the bottom completion if you try to drive on the street with that cam.

It's probably recommended for higher than 9.5:1 compression as powerfully, that's a drag race or circle track type of cam.
i now what u tight-fisted...best to call cam co.you may need differnt ratio rockers..they know what the cam should be used contained by...you might try summit racing...they have a tech stripe u can call..

What is a well-mannered vehicle to buy...


Resolved Questions

Copyright © 2008-2010 All rights reserved. YesImAuto.com