When I am driving it, it doesnt want to go into 1st 3rd or 5th gears, but it go into 2nd 4th and reverse just fine. It sounds to me close to the clutch master cylinder but i have hear it could be from the linkage if it is seperate or if it isnt, it could be in the transmittion, if someone know let me know please.
Answers: To me the reality that you can get adjectives the gears easily when you verbs the lever back, but not when forward strongly;y suggests linkage or similar. Try that in the past trying anything on the hydraulic side.
Is the trans. making any grinding noises when you get the shifts? Is it hard to grasp into 1 st. when you are stopped and the engine is running? Do you have the 4 cyl. or V-6 engine?
The Fiero is prone to have the clutch master go fruitless - but also the clutch slave cylinders were a problem.
Make sure to obtain all the upper air out of the system if you change any parts. Below is a contact that tells you the proper bleeding method. Hope this help you out !
Answers: To me the reality that you can get adjectives the gears easily when you verbs the lever back, but not when forward strongly;y suggests linkage or similar. Try that in the past trying anything on the hydraulic side.
How do I fix a street light...
Is the trans. making any grinding noises when you get the shifts? Is it hard to grasp into 1 st. when you are stopped and the engine is running? Do you have the 4 cyl. or V-6 engine?
The Fiero is prone to have the clutch master go fruitless - but also the clutch slave cylinders were a problem.
Make sure to obtain all the upper air out of the system if you change any parts. Below is a contact that tells you the proper bleeding method. Hope this help you out !
Resolved Questions
- What might enjoy happen to my sports...
- 1993 z28 camaro over heat?
- How to adjust low plank headlights on...
- How much to take-home pay for flipside...
- How do bring rid of the fog...
- Binding Breaks on a 53 Reg Vauxhall...
- What to do if something is wrong...
- My clutch pedal is kinda firm....?
- My reversing lights don't work and the...
- I want instructions toward varying a timing...