I have a 35 coupe with chrome 20's and the flipside clean very nicly, but the front one;s give the impression of being to be stained or etched into from the brake dust. They look like black spots and are rough to the touch. Is there anyway to clear this up? I've tried chrome polish. lately makes the blck spots more noticable.
Don't titter. W-D-40. It will emulsify the brake dust. The dust is etching, because of heat. Clean them cold! When you have the wheel clean, wash of the W-D-40, near a mild detergent. Then, use Windex, to remove the water spots. It's an old biker trick. Next time, find a biker. Name me a vehicle beside more chrome than a Harley Davidson!
Answers: Are you sure this is brake dust?
To me, it sounds more like rust. I could effortlessly be wrong -- not an expert -- but brake dust wouldn't etch itself permanantly into metal.
If you live in an area where on earth Salt is put on the roads (To combat ice etc. in the winter) I'd any invest in some ugly winter rims, or budge the extra mile and buy some polished aluminium rims (They take much longer to rust, if they do at all).
Hope this helps. :)
Don't titter. W-D-40. It will emulsify the brake dust. The dust is etching, because of heat. Clean them cold! When you have the wheel clean, wash of the W-D-40, near a mild detergent. Then, use Windex, to remove the water spots. It's an old biker trick. Next time, find a biker. Name me a vehicle beside more chrome than a Harley Davidson!
Are older cars approaching '70s or 60s.....
they need all that chrome on a hardley so they look dutiful on the side of the road,or sitting in the lot with everyone standing around lying almost how nice their s77t box is.of course half the time its not running and when it is its the easiest bike to find,freshly follow the leaks.you can eliminate that brake dust problem adjectives together if you install ceramic brake pads.If it is pitted as you articulate,that is from the inside and coming out,you cant remove that,SORRY.Putting a chevy 305 on my tractor?
Don't titter. W-D-40. It will emulsify the brake dust. The dust is etching, because of heat. Clean them cold! When you have the wheel clean, wash of the W-D-40, near a mild detergent. Then, use Windex, to remove the water spots. It's an old biker trick. Next time, find a biker. Name me a vehicle beside more chrome than a Harley Davidson!
I hold a 2000 z28 caamro and...
Answers: Are you sure this is brake dust?
To me, it sounds more like rust. I could effortlessly be wrong -- not an expert -- but brake dust wouldn't etch itself permanantly into metal.
If you live in an area where on earth Salt is put on the roads (To combat ice etc. in the winter) I'd any invest in some ugly winter rims, or budge the extra mile and buy some polished aluminium rims (They take much longer to rust, if they do at all).
Hope this helps. :)
Don't titter. W-D-40. It will emulsify the brake dust. The dust is etching, because of heat. Clean them cold! When you have the wheel clean, wash of the W-D-40, near a mild detergent. Then, use Windex, to remove the water spots. It's an old biker trick. Next time, find a biker. Name me a vehicle beside more chrome than a Harley Davidson!
How do i repair a brass radiator?
Resolved Questions
- I hold one radiator that I hold...
- Why won't my Firebird start?
- I be driving next to bleak pedals...
- My truck is making a whining pandemonium?
- Blue smoke=residue from cat converter?
- Head Gasket trademark?
- Would ya be capable of put a...
- I enjoy a91chevy truck wants tranny350ci whatcars...
- How do you know if your motor...
- I changed my motor freestyle today. After...