Brake Light Question?

If you press the brake and the left light doesnt work, but the when you turn the lights on the pale comes on. Is it the fuse or is it the bulb?

I own an '03 toyota matrix, the...


My vehicle make a coil up hullabaloo...


the bulb is toast

What is cheapest path to do business...

its the bulb.
Fuse: Both would not work.

Replace the bulb

The bulbs enjoy 2 elements in them. When you turn on the lights, the low intensity element is lit. When you hit the brake, the second component lights up...Very common. You should be able to access the bulb from the trunk nouns.should be 1/4 turn to remove the socket and then you can remove the bulb.

With the new bulb, do ultimately handle the bulb as any oils on your hand will cause the bulb to prematurely fail (experience!). When inserting the strange bulb in the socket, use a paper towel to switch the bulb and wipe the glass clean after it is within place..then reinsert the socket back into place and you should be appropriate to go. When inserting the bulb, you should not need to force it, if you do, you probably call for to turn the bulb around and try it that way...OR you have be given the wrong type.make sure you have an exact contest or an OEM replacement.

Another tip: Replace both and you will not have to revisit the lights for quite a while.

I enjoy a nouns leach at the...


didnt bring what u where tryin to say, but u can check the fuse that go with the light youre conversation about or simply grab a screwdriver and steal tailgate off, and see if the bulb is burned or not... good luck

E320 1997 Mercedes Benz strong shaking?



Answers:    your break light (bulb) is different than the rear flimsy (bulb) that comes on when you turn your head lights on. replace the break light... it's not a fuse.
the bulb is toast

Last time: 1993 Dodge van 250 -...


Fuse: Both would not work.

Replace the bulb

The bulbs enjoy 2 elements in them. When you turn on the lights, the low intensity element is lit. When you hit the brake, the second component lights up...Very common. You should be able to access the bulb from the trunk nouns.should be 1/4 turn to remove the socket and then you can remove the bulb.

With the new bulb, do ultimately handle the bulb as any oils on your hand will cause the bulb to prematurely fail (experience!). When inserting the strange bulb in the socket, use a paper towel to switch the bulb and wipe the glass clean after it is within place..then reinsert the socket back into place and you should be appropriate to go. When inserting the bulb, you should not need to force it, if you do, you probably call for to turn the bulb around and try it that way...OR you have be given the wrong type.make sure you have an exact contest or an OEM replacement.

Another tip: Replace both and you will not have to revisit the lights for quite a while.

Using mobil 1 grease, how recurrently do...

Why dont you a short time ago change the bulb and eliminate the .19 cents element first, if that doesn't fix it, take it to a shop. The fuse works both brakes lights and the third brake light so if any of them muted up, common sense tells you it's not the fuse.
didnt bring what u where tryin to say, but u can check the fuse that go with the light youre conversation about or simply grab a screwdriver and steal tailgate off, and see if the bulb is burned or not... good luck

Resolved Questions

Copyright © 2008-2010 All rights reserved. YesImAuto.com