What can cause a compession reading of 30-40-30-40 within an eagle talon? The motor has current rings, head and deck hold be surfaced. Could not having timing belt on correctly do this? The motor is a double overheadcam.
Answers: improper timing belt placement could be a possibility
also are you sure the rings be staggered?
did you have a stopcock job perform ?
i would start with checking the timing belt and manufacture sure all the results line up after the engine have turned a couple of times
also check your gage if you can on another car gross sure your gage is OK
A good engine should be around 130 psi surrounded by the cylinder and it does not hurt to have a 10 psi difference between the cylinders.
New tensioner and engine mount, is the...
Answers: improper timing belt placement could be a possibility
also are you sure the rings be staggered?
did you have a stopcock job perform ?
i would start with checking the timing belt and manufacture sure all the results line up after the engine have turned a couple of times
also check your gage if you can on another car gross sure your gage is OK
On my 00 DodgeDakota the RPM wont...
A good engine should be around 130 psi surrounded by the cylinder and it does not hurt to have a 10 psi difference between the cylinders.
Resolved Questions
- What happen to the out-of-date press molds...
- Brakes on a 2005 Dodge Caravan?
- Clutch problem on my 98 Eclipse GST?
- My key are stuck contained by the...
- Somebody flipside terminated my coup¨¦ and damages...
- What to do roughly speaking lubricants drying...
- I own a 1970 cutlass 442 and...
- Vx commodore backside brakes?
- How do you install starter for a...
- Neg 42 Outside, have to drive... problem...