Ford Keyless Entry On 2000 Explorer?

I Know That On Ford Cars The Pushbuttton Keyless Code Is On A Tag On One Of The Trunk Hinges Where Might I Find The Tag On A 2000 Explorer We Looked In All The Door Jams And Rear Hatch And Can't Find It

My mini van get flipside terminated today.....

Answers: . If issues are experienced with Keyless Entry keypad operation (located on driver door):

All keyless entry remote transmitters are programmable and must be set at the same time.
To program (or reprogram) the keyless entry remote transmitters into the RAP module, achieve the following steps:
Make sure that the anti-theft system is not armed or triggered.
Turn the ignition switch from OFF to RUN eight times within ten seconds , culmination in RUN. If the RAP module has successfully enter program mode, it will lock and then unlock all doors.
Press any button on a keyless entry remote transmitter, and the doors will lock and afterwards unlock to confirm that each keyless entry remote transmitter has be programmed.
If the door locks do not respond for any keyless entry remote transmitter, wait several seconds and press the button again. If the door locks still go amiss to respond, refer to Diagnosis and Testing. See: Testing and Inspection
Turn the ignition switch to the OFF position, or wait up to 20 seconds after step 2, to exit program mode. If a keyless entry remote transmitter have been programmed (or reprogrammed), the RAP module Will lock and unlock all doors one final time to confirm.

Why does my appendage brake hold on...

Resolved Questions

Maintenance & Repairs
Buying & Sell
Auto Audio
Auto Makes
Commuting
Insurance
Registration
Safety
Motorcycles
Other Autos