Hi! I have a 1990 Mazda 626 DX... and the heater not quite works. There is plenty of coolant/antifreeze, there is flow through the heater core, and the thermostat is working. I hold also bled the system of any air pockets so I don't think near is any air locks... and the blender doors SEEM to be working. Can anyone help??
Thanks surrounded by advance for any replies..
check the antifreezeif it is mixed because it must be 50%water or it never get hot enough to make available heat
Answers: Sounds like blower motor, blower motor resistor, or blend door not actuate properly. Start the car and put the heat on and generate sure all setting of the fan are working, that eliminate the blower motor as well as the resistor, then be aware of around the evaporator case under the fly and see if the door isn't opening or closing all the bearing.
check the antifreezeif it is mixed because it must be 50%water or it never get hot enough to make available heat
what u mean heater only just works? are you saying this regarding the heavens flow or the heat ? pleasy specify that?
what u mean heater only just works? are you saying this regarding the heavens flow or the heat ? pleasy specify that?
Can't tell, but I would verbs the plug on the AC compressor to make sure no cold air is coming contained by and try moving the selector from floor to vent to mix to defrost. Worth a try.
Can't tell, but I would verbs the plug on the AC compressor to make sure no cold air is coming contained by and try moving the selector from floor to vent to mix to defrost. Worth a try.
Thanks surrounded by advance for any replies..
Where can I find a place to...
I enjoy an 03 concurrence and i...
check the antifreezeif it is mixed because it must be 50%water or it never get hot enough to make available heat
Why would near be a blue substance...
Answers: Sounds like blower motor, blower motor resistor, or blend door not actuate properly. Start the car and put the heat on and generate sure all setting of the fan are working, that eliminate the blower motor as well as the resistor, then be aware of around the evaporator case under the fly and see if the door isn't opening or closing all the bearing.
check the antifreezeif it is mixed because it must be 50%water or it never get hot enough to make available heat
what u mean heater only just works? are you saying this regarding the heavens flow or the heat ? pleasy specify that?
How possible is it that a person...
Your heater core might still be plugged even though in that is flow.what u mean heater only just works? are you saying this regarding the heavens flow or the heat ? pleasy specify that?
How do you adjust a torque wrench?
Can't tell, but I would verbs the plug on the AC compressor to make sure no cold air is coming contained by and try moving the selector from floor to vent to mix to defrost. Worth a try.
Is this problem beside my Toyota truck...
My car is a1995 Ford Aspire that I get 2 years ago, VERY used. It hasn't had heat or defrost since I get it. I have to use that defrosting spray on the inside if I drive it surrounded by cold temps. Like yours, everything seems to be in working proclaim, but I can't see sinking a couple hundred $s into a car that old that singular cost me $400 in the first place. I've sort of gotten used to it, I guess.Can't tell, but I would verbs the plug on the AC compressor to make sure no cold air is coming contained by and try moving the selector from floor to vent to mix to defrost. Worth a try.
Resolved Questions
- I want to be a tuner, not...
- Why does a start to purloin too...
- Would you hoist a 2wd?
- After replacing the timing belt on our...
- Car sturdy to start but runs sweet...
- Do you own to smog a vehicle...
- Engine misses and dies?
- Why won't my 1990 CRX start?
- How much does is cost for a...
- In the UK we own Premium and...