What is overdrive... what it channel?
Answers: I did some investigation of your question. If you are referring to the high-mount stoplamp, you cannot newly replace bulbs. I would start by determining if there is power to the hurricane lantern when the brake is depressed, check fuses. It also requires some special tools to reinstall the trim once you replace the lamp assembly or ballast (depending on what it needs). You must remove the interior and exterior trim from around the light. There are two rivits that need to be removed- and replaced- to attain the trim off. Remove the light ballast assembly, then remove the hurricane lantern assembly. The problem may just be the ballast. Either module is expensive. You may be able to locate working parts from a wrecking courtyard, but it is still costly. Your best bet is to have the hawker diagnose and repair it.
Resolved Questions
- Gassing up within precipitate morning is best?...
- Okay I involve assistance putting engine coolant...
- Carsssss :) read :)?
- 1994 Ford 1215 tractor battery-operated discharging problems!...
- My wife be funding out of parking...
- What Is The Most Money You Have...
- Yet another vehicle mobile or alternator give...
- What does it be a sign of...
- How to reset matance milage on a...
- Is it okay to shift gears short...