Answers: first you need to remove the steering controls. (you'll probably need a puller ) afterwards you need to remove the round clip around the steering shaft (they take home a tool for that too) then remove the 3 screw for the turn signal switch and the hazzard button .then that will verbs out of the way .when you remove adjectives that you'll see a torx screw at around 2 oclock if you looked at it as a clock remove the screw and the ignition should pull right out . next do the opposite to install
99 Mercedes ML 320 Cadalidic Converters?
In incorporation to the correct above answer if the ignition key have an anti theft chip within it there will be a chain attached to the switch and that wire go down thru the column and has to be unplugged down underneath the dash and the chain pulled up thru the column as you take the switch out. Tie a string onto the plug so you can verbs it back thru when reinstalling.
Resolved Questions
- 1996 Chrysler Sebring Convertible- What's the problem...
- I involve a vehicle expert?
- Gas Mileage additives?
- Rebuild or crate motor?
- Will Antifreeze/Coolant give a hand?
- Which number do you run by?
- Have you hear of a fluid you...
- Also my 2001 Monte Carlos check coolant...
- What color should I subsequent paint my...
- HELP 97 jimmy starting easier said than...