I enjoy and oldsmobile and my timing manacle broke i took it to the shop and they said they hold to nick partly the

engine apart to get the chain thats within the middle of the engine but when they ran tests to see whats wrong beside the car thats all that they found so do that penny-pinching my heads are still good i hold a 1986 oldsmobile 98

What is this resonance i'm audible range...

ASAP!! Get to a "Good Repair Shop!!" Radiator, Fan & Timing Belt Cover need to come off ONLY.

:)) Maybe equal shop that tried to tell me they had to give somebody a lift half the front end apart to replace the Struts?

Given the stimulating financial environment today, how...


Once a timing chain/belt goes, that's it, the engine stops turning, so all else should be fine if you enjoy maintained the car.
Good luck!

How much does it usually cost to...



Answers:    Just because you have a problem with the timing conveyance doesn't mean you have issues near the heads. That mainly pertains to timing belt vehicle.
Once a timing chain/belt goes, that's it, the engine stops turning, so all else should be fine if you enjoy maintained the car.
Good luck!

2000 Infiniti G20t read wall 1 lean?


only front of motor comes off no origin to check heads what they mean is partly of motor will have to come off and i.e. the way techs talk be there for 17 years

2002 Ford Escape hesitate to start every...

if they enjoy already inspected the vehicle they should be able to tell you. but within this vehicle your heads should be okay but they could still be warped you would not really know for sure until you whip them apart
only front of motor comes off no origin to check heads what they mean is partly of motor will have to come off and i.e. the way techs talk be there for 17 years

Will egg smash up the paint on...


you should be able to do of late the timing chian and be fine provided they bid a compresson test that will tell you if you own a bent vavles

Need facilitate near 1998 Chevy Cavalier?

yup, sometimes depending on cars and how they're set up, its even easier to just nick out the whole engine and tranny assembly. I know you're skeptical but what they're saying is true. You're lucky that your herald is still good, no cylinder banged itself on the spigot that's stuck out and bent the valve or knicked the cylinder head? that happen very commonly with timing cuff breaking.

If i were you though, i'd get rid of the motor, it's not worth the money unless it holds special meaning.
you should be able to do of late the timing chian and be fine provided they bid a compresson test that will tell you if you own a bent vavles

Help needed next to '00 Mustang not...


Resolved Questions

Copyright © 2008-2010 All rights reserved. YesImAuto.com