I have a 93 acura integra. I want to correction the oil within it myself but have never done it until that time. Can anyone tell me how to do it or bestow me a website with a guide on how to do it?Also is in that any ways to easily fix an grease leak?
You might want to turn to a car parts store and buy a book on your car's put together and model. It usually comes in handy whether you're varying the oil or doing other things. I'm pretty sure it shows/tells how to coppers the oil.
http://www.geocities.com/MotorCity/Flats...
hope this helps
Answers: hey, its pretty simple i miserable changing grease isnt really a hard point to do there is only just a few steps tho, i change my friends grease in his 92 integra, presently are you like have trouble finding the drain plug? and what kind of motor is within it, and its pretty easy but poorly tell you what i do i go and get under that vehicle and look at the bottom of the motor look for the oil container, when you see it there should be a bolt at the cease of the pan MAKE SURE ITS NOT THE TRANNY and draw from a drain pan drain the grease and then find the grease filter that is on the rear side of the motor its a real stomach-ache in the *** to carry to turn that off and view out try and not to get grease everywhere then put the modern fliter on but not just nonetheless put alittle oil on your finger and rub it around the trademark on the filter and screw it back on tight and but the drain bult pay for on and put the oil within try around 4 quarts but give it a second to hit the tub then check the grease and if it needs more put more within... if you have any more give somebody the third degree or you need better detail only email me back man dufresnejustin(a)YAH00.com virtuous luck
2004 Chevy Impala won't start. No power...
You might want to turn to a car parts store and buy a book on your car's put together and model. It usually comes in handy whether you're varying the oil or doing other things. I'm pretty sure it shows/tells how to coppers the oil.
(2006 hybrid)TOYOTA SMART KEY BATTERY?
http://www.geocities.com/MotorCity/Flats...
hope this helps
1963 chevy longbed next to a 302...
Answers: hey, its pretty simple i miserable changing grease isnt really a hard point to do there is only just a few steps tho, i change my friends grease in his 92 integra, presently are you like have trouble finding the drain plug? and what kind of motor is within it, and its pretty easy but poorly tell you what i do i go and get under that vehicle and look at the bottom of the motor look for the oil container, when you see it there should be a bolt at the cease of the pan MAKE SURE ITS NOT THE TRANNY and draw from a drain pan drain the grease and then find the grease filter that is on the rear side of the motor its a real stomach-ache in the *** to carry to turn that off and view out try and not to get grease everywhere then put the modern fliter on but not just nonetheless put alittle oil on your finger and rub it around the trademark on the filter and screw it back on tight and but the drain bult pay for on and put the oil within try around 4 quarts but give it a second to hit the tub then check the grease and if it needs more put more within... if you have any more give somebody the third degree or you need better detail only email me back man dufresnejustin(a)YAH00.com virtuous luck
Resolved Questions
- How do i replace the adherent resistor...
- Synthetic grease vs natral?
- How frequent quarts of atf for a...
- Ford EA falcon problems?
- 2002 Honda CRV QUESTION? modifying?
- Manual transmissions: speed, rpms, gear inspection, how...
- I hold a 96 Mazda Protege DX....
- Why my vehicle doesn't start?
- How do I fix my shoulder restaint...
- Where are the fuses or realys for...