Nissan Almera Burning smell-Fan Heater stays on?

I had a burning smell and afterwards the fan kiln was staying on even when the knob be on position 0.
I took it to local garage who needs to strip the cover to diagnose which space heater part is imperfect. For safety and stop the smell he have disconnected the connectors to the heating system.
My coup¨¦ is 03 Nissan Almera. Will any heating segment is covered under warranty or safekeeping recall? How dangerious be this problem, could the car enjoy caught on fire.
Thanks

When you make over the saloon battery-operated...



Answers:    Almera Is Maxima In the USA. Twice within Maxima I have see something craw into the blower motor and cause to much current draw plenty so to short the motor speed controler. Once the fan it self be drawing 12 amps wear on the bushings. In Texas USA we use A/C 9 to 10 months a year. In Europe you use window defog and furnace. ANd some rare hot days see the A/C in. Both the parts are held surrounded by with #2 philips screw gold colored. basically below the glove box. The blower motor assembly is held to the fresh air valise with three screw and the motor speed control (amplifiler) two screws right subsequent to each other screw in vertically. Just see if your extended warranty is Nissan Gold Plan afterwards it is free. 5 model years and two body styles old you still hold a very nice tool. Go to the Nissan dealer check warranty if a covered part. (bugger) next pick up both blower motor and motor speed controler and install them yourself. Great nose!

Can a th350c be used to build...


the supporter switch is bad

Resolved Questions

Copyright © 2008-2010 All rights reserved. YesImAuto.com