i have tried to spray paint metal many times and every time i do it newly allwas scraches right off the surface i have tried cleaning surface deeply well, sanding it,small coats at a time,useing recommended paint, letting respectively coat dry before the next,and it allwas seem to peel off what am i doing rong?
You need to use a sealer/primer with out metal. Make sure you sand it before painting.
scuff the paint beforehand you spray
You need to use a sealer/primer with out metal. Make sure you sand it before painting.
Answers: Spray paint is no correct , it is much better to apply paint with a cigar roller.
Spraying paint gives layer of a "powder coat"
This powder coating effect for 1, is just not thick plenty and just lays down to get a bond.
Rolling a paint on get much better adheashion .
Always scuff the surfaces with sand paper throughly , and next wipe the excess dust off with a raining rag of Acitone (finger nail polish remover)
I painted my total Truck for under $40
People thing I spent a $1000 or more.
http://www.flickr.com/photos/noneshere/s...
scuff the paint beforehand you spray
While finance out of a driveway, my...
Try the spray paint brand Rust-O-Leum brand...Most of their paint is made to be stain on metal. Also, the temperature affects how well it sticks. Cold weather will net the paint spread apart from what i experienced. Don't spray too close otherwise it will be too wet and thick. There is also types of paint from other brans that are made for metal, Krylon also carry them.You need to use a sealer/primer with out metal. Make sure you sand it before painting.
My ford f-series pickup's reservoir go out....
scuff the paint beforehand you spray
Can you put sports car grease contained...
use some primer, relatively cheap stuffIs within anyvody that can help...
You need to use a sealer/primer with out metal. Make sure you sand it before painting.
Cherry bomb chalice pack smell?
Answers: Spray paint is no correct , it is much better to apply paint with a cigar roller.
Spraying paint gives layer of a "powder coat"
This powder coating effect for 1, is just not thick plenty and just lays down to get a bond.
Rolling a paint on get much better adheashion .
Always scuff the surfaces with sand paper throughly , and next wipe the excess dust off with a raining rag of Acitone (finger nail polish remover)
I painted my total Truck for under $40
People thing I spent a $1000 or more.
http://www.flickr.com/photos/noneshere/s...
scuff the paint beforehand you spray
My parking brake neutral comes subsidise on,...
Resolved Questions
- Help please stipulation to know the signature...
- Where is the turnal frothy flasher located...
- If I basically cut the boot bad...
- Is a fuel filter critical?
- If i take strange tires, do i...
- What if your coup¨¦ obtain stuck within...
- CAr repairs!!?
- Heater problems.?
- I own a vw polo(03) and doesn't...
- How much to fix bent front axel?