Western snow plow problem?

i have a electric over hyd plow cable operate.it goes up and down fine i can get hold of it to go vanished and not right or i can get it to be in motion right but not left.i enjoy made many adjustment on the cable at the pump.are there any tricks to adjust these things?.we are getting lots of snow here in ny.appreciation jeff

My Honda provider said a current timing...

Have you checked the hydraulic fluid stratum? Meyers plows will do the same entry when they get low on fluid.

Need some guidance formerly i paint my...

I grew up in Upstate NY contained by the snow belt so I can appreciate working on cars during the winter months up there. Not knowing roughly snow plows, I would first go to the plow manufacturer's website and download a copy of the installation and operation guide for your plow. Search Google or Yahoo for the manufacturer's name. They may enjoy a technical support hot rank you can call to agree to a technician about the problem too.

http://www.westernplows.com/

What is the best bearing to verbs...

Answers: Jeff I also am in upstate NY and yes it is snowing strong, The control valve for your plow is mounted underneath hood correct? the cables own a yoke that hooks to the valve and the cable conclusion is threaded with a nut on ether side, be sure that they are tight also the cable is fastened to the control tap in a similar mode be sure that they are also tight, any free play there is not going to properly control the tap. You may want to next check the mounting to the control go before inside the cab to be sure the cable is tight at hand also. Have fun plowing!

Resolved Questions

Maintenance & Repairs
Buying & Sell
Auto Audio
Auto Makes
Commuting
Insurance
Registration
Safety
Motorcycles
Other Autos