I am getting 2 of these http://www.alpine-usa.com/US-en/products... does this amp work http://cgi.ebay.com/VOLFENHAG-ZX-8400-2-... or is there a better one i can draw from for fairly cheap, i don't know how to line them together exactly so plz tell me what to do
Answers: You won't know how to get full power from this amp using these 2 subs. Plus, Volfenhag isn't a righteous brand, at all, so it probably won't push them drastically well.
I recommend getting a mono (1channel) amp that puts out more or less 1000watts RMS x 1 (a) 2ohms and wiring the subs to it approaching this;
http://www.the12volt.com/caraudio/woofer... -Option #1, 2ohm load.
You'll involve an amp that is CEA-compliant. This ensure that it'll put out what it claims.
HiFonics, Phoenix Gold, and Planet Audio propose great bang for the buck amps.
You may find an Alpine or Kicker on mart.
Also, with 1000watts of RMS power, you'll stipulation to do the Big3 upgrade;
http://www.the12volt.com/installbay/foru...
And possibly upgrade to a HO (high-output) alternator.
Have Fun!
If your total system power is 1000 watts RMS or more, you will need to:
1. Upgrade the alternator to a glorious output alternator
2. Upgrade to a heavy duty wide cycle battery
3. Upgrade the "Big 3" - specifically to replace the power wire between the mobile and alternator, the ground from the battery to the chassis and the ground strap from the engine/tranny to the chassis beside at least 1/0 AWG rope.
Failure to do this will result in you replacing them anyway as the alternator will eventually fall through.
Here is a guide that will calculate what size alternator and power wires you obligation http://www.datafilehost.com/download.php...
See my site for more info http://spkrbox1.spaces.live.com
How can i find the wattage of...
Answers: You won't know how to get full power from this amp using these 2 subs. Plus, Volfenhag isn't a righteous brand, at all, so it probably won't push them drastically well.
I recommend getting a mono (1channel) amp that puts out more or less 1000watts RMS x 1 (a) 2ohms and wiring the subs to it approaching this;
http://www.the12volt.com/caraudio/woofer... -Option #1, 2ohm load.
You'll involve an amp that is CEA-compliant. This ensure that it'll put out what it claims.
HiFonics, Phoenix Gold, and Planet Audio propose great bang for the buck amps.
You may find an Alpine or Kicker on mart.
Also, with 1000watts of RMS power, you'll stipulation to do the Big3 upgrade;
http://www.the12volt.com/installbay/foru...
And possibly upgrade to a HO (high-output) alternator.
Have Fun!
If your total system power is 1000 watts RMS or more, you will need to:
1. Upgrade the alternator to a glorious output alternator
2. Upgrade to a heavy duty wide cycle battery
3. Upgrade the "Big 3" - specifically to replace the power wire between the mobile and alternator, the ground from the battery to the chassis and the ground strap from the engine/tranny to the chassis beside at least 1/0 AWG rope.
Failure to do this will result in you replacing them anyway as the alternator will eventually fall through.
Here is a guide that will calculate what size alternator and power wires you obligation http://www.datafilehost.com/download.php...
See my site for more info http://spkrbox1.spaces.live.com
Resolved Questions
- Kicker comp. c12 v.s. ??
- I call for to find out how...
- Will Insulation clear speakers louder?
- Component Systems?
- Do I stipulation 'Sirus Connect' for a...
- HOw to set my kicker amplifier?
- Car stereo suggestion please!?
- Rate My Sound System?
- I own a 2002 GT next to...
- Need give support to beside my Sirius...