and what is the best wood to build it out of
anywhere between 11 inches and 11 1/2 inches.
roughly speaking 11 1/4 inches, and sometimes as big as 11 1/2 inches inch round.. the extra inch sits on the top of the wood and you screw the speaker the the frame.
3/4 fibre board. (MDF)
the sub normally comes next to a cutout
an 11 inch should fit perfect and the best wood is 3/4 mdf strong like bull dont forget 2 trademark the box for maximum proformance
Answers: Probably about 11".
Measure from the edge to where on earth
the spider slopes toward the magnet assembly,
should be about 1/2", times two (both edges)
>1/2" X 2=1" and then distribute it an extra 1/8" to 5/32"
to give it some room to expand and contract with fry and cold.
Just make sure the screw holes are'nt off the threshold.
You can also measure from
the inside of the hole on one side
to the inside edge of the hole on the disparate side
and then subtract a small amount from that distance.
As long as the sloped part of the picnic basket
is not tight against the wood it should work.
The important thing is that the hole be round
as any errors contained by the arc will
leave the potential for leaks or
pressure against the picnic basket
that could distort it
and possiblly bind the mechanism,
leading to the coil rubbing or
the cone tear its surround.
It could possibly burn out the speaker
or even fry an amplifier.
Not to mention sound like crap
while its rubbing its agency toward building a fire.
Silicon works well for a sealant, but
also use the screw holes and appropiate fasteners,
to hold on to it from hopping to its death one day.
Also make a payment grills;they will keep that foreign object you thought would stay put from poking its opening thru them kickers, and keep other junk at not detrimental distance from the workin' surface.
High quality connectors, handles and even metal corners will dramatically modernize the portability and survivability of the cabinets and thus the components housed inside.
And give them a PROFESSIONAL look!.
roughly speaking 11 1/4 inches, and sometimes as big as 11 1/2 inches inch round.. the extra inch sits on the top of the wood and you screw the speaker the the frame.
3/4 fibre board. (MDF)
the sub normally comes next to a cutout
an 11 inch should fit perfect and the best wood is 3/4 mdf strong like bull dont forget 2 trademark the box for maximum proformance
anywhere between 11 inches and 11 1/2 inches.
an 11 inch should fit perfect and the best wood is 3/4 mdf strong like bull dont forget 2 trademark the box for maximum proformance
Car Audio Speaker Amp Trouble?
anywhere between 11 inches and 11 1/2 inches.
How do i connect a vehicle amp...
roughly speaking 11 1/4 inches, and sometimes as big as 11 1/2 inches inch round.. the extra inch sits on the top of the wood and you screw the speaker the the frame.
3/4 fibre board. (MDF)
the sub normally comes next to a cutout
an 11 inch should fit perfect and the best wood is 3/4 mdf strong like bull dont forget 2 trademark the box for maximum proformance
What does the ATT be a sign...
Answers: Probably about 11".
Measure from the edge to where on earth
the spider slopes toward the magnet assembly,
should be about 1/2", times two (both edges)
>1/2" X 2=1" and then distribute it an extra 1/8" to 5/32"
to give it some room to expand and contract with fry and cold.
Just make sure the screw holes are'nt off the threshold.
You can also measure from
the inside of the hole on one side
to the inside edge of the hole on the disparate side
and then subtract a small amount from that distance.
As long as the sloped part of the picnic basket
is not tight against the wood it should work.
The important thing is that the hole be round
as any errors contained by the arc will
leave the potential for leaks or
pressure against the picnic basket
that could distort it
and possiblly bind the mechanism,
leading to the coil rubbing or
the cone tear its surround.
It could possibly burn out the speaker
or even fry an amplifier.
Not to mention sound like crap
while its rubbing its agency toward building a fire.
Silicon works well for a sealant, but
also use the screw holes and appropiate fasteners,
to hold on to it from hopping to its death one day.
Also make a payment grills;they will keep that foreign object you thought would stay put from poking its opening thru them kickers, and keep other junk at not detrimental distance from the workin' surface.
High quality connectors, handles and even metal corners will dramatically modernize the portability and survivability of the cabinets and thus the components housed inside.
And give them a PROFESSIONAL look!.
roughly speaking 11 1/4 inches, and sometimes as big as 11 1/2 inches inch round.. the extra inch sits on the top of the wood and you screw the speaker the the frame.
3/4 fibre board. (MDF)
the sub normally comes next to a cutout
an 11 inch should fit perfect and the best wood is 3/4 mdf strong like bull dont forget 2 trademark the box for maximum proformance
My motor stereo requires a code (suddenly)...
What you need to know http://spkrbox1.spaces.live.comanywhere between 11 inches and 11 1/2 inches.
an 11 inch should fit perfect and the best wood is 3/4 mdf strong like bull dont forget 2 trademark the box for maximum proformance
Decided to walk next to (2) jl...
Resolved Questions
- Rockford Fosgate?...?
- My 2002 Chevy Cavalier radio/cassette/cd player only...
- Car Subs Hit On and Off (Amp...
- Those the ground lead brand the freestyle...
- Car stereo no nouns?
- Whats a appropriate amp to walk near...
- HELP sports car nouns systems!!?
- What would be a flawless motor deck...
- Car radios?
- What is the stock subwoofer size for...