How do you solder?

I got a untried radar dectector that I want to solder it into the fuse box so what do i need to do this and whats the difficulty of it?

Is this motor audio hypothesis possible?

Answers: you don't neccessarily own to solder the wires. you can get a fuse touch from any automotive store that will go surrounded by with the fuse so you can in recent times put a female spade on your power lead going to the radar detector and then ground it. depending on your saloon, if the cig. lighter is easy to seize to, you can splice into the wires behind it. you will involve to test to see which one is power and which one is ground though. to answer your interrogate on how to solder, if you're soldering a wire to a line, twist the two together after place your soldering iron underneath the wire and tolerate it heat up, touch the solder resting on the wire you are heat and let it liquefy and soak into the wire. you don't touch the solder directly to the soldering iron. i would any go beside the fuse taps and find a fuse that have power with the push button on and nothing beside the key bad, so the radar turns on and off. the power pane fuse or the sunroof fuse or the radio ignition fuse for examples. good luck

What amp will push a kicker cvr...

solder nil. use the wire tools that came beside it, and wire it within, per instructions

Resolved Questions

Maintenance & Repairs
Buying & Sell
Auto Audio
Auto Makes
Commuting
Insurance
Registration
Safety
Motorcycles
Other Autos