My saloon audio system?

I have three mtx 10's and an 1800 watt amp and the power wire is resembling 18 gauge and the fuse block on it blows like crazy

Im gonna translate the wire (ground + power) to 4 gauge and a bright fuse block (block that uses big 80a fuses) will i get better quality? And will the battery-operated be less weak?

1993 Ford Aerostar XLT System?

if you have 1800 watts i would suggest 2 gauge chain because at 1800 watts you're drawing 125 amps and 2 gauge wire will hold less resistance and you'll get more power. i would also suggest upgrading "the big three" upgrade the chain off your alternator that charges your batter, upgrade your chassis ground and your engine ground to wire size that match what your amps going to have

What do U guess almost Dimond Audio...


The battery will only be smaller amount weak if you get a Capacitor or two. I would recommend 2 1 Farad's if you really want it to be strong, it also help with quality and keep the amps steady.

What's the difference (other than price) between...



Answers:    its not the freestyle that you should worry about right away but the ALTERNATOR of your vehicle if it is not sufficient next the battery will be destroyed.

The wiring is especially important in maintain a quality system if not tacky enough you will lose a lot of potential power as warmness in the wire itself! not to mention it could raison d`¨ētre a fire. better to have it too think than too diaphanous
The battery will only be smaller amount weak if you get a Capacitor or two. I would recommend 2 1 Farad's if you really want it to be strong, it also help with quality and keep the amps steady.

What compassionate of amp do i necessitate?


Resolved Questions

Copyright © 2008-2010 All rights reserved. YesImAuto.com