Setting frequency for my amp?

I have 2 6x9 speakers and 2 6 1/2 speakers. I want to know what frequency level would be right for the speakers. And with the 6X9 speakers should i set it at high pass by, low pass, or neither?

Can you run a bass tube and...

The 6.5's should be set at high freq since you really don't want any bass going to these speakers. Now the 6x9's can be set on high but you want to set these at the lowest possible freq first (if your amp or x-over is equiped with this option). You can also run them without a setting if you'd approaching, they should be able to handle the bass. Also if you join a sub your sound should increase ten fold.
GOOD LUCK

Subwoofer Question?

it depends on the crossover settings on the amp. 80-100 hz on the low side should be a well-mannered starting point. i'd run it high pass if your setting will consent to you cross it over that low.

How do I Hooking up my PS3...

Answers: 6.5's hp (a) 65hz and up
6x9's hp (a) 50 hz and up
play with it and listen to what sounds best, and at full volume produces the most minimal clipping.

it depends on the crossover settings on the amp. 80-100 hz on the low side should be a well-mannered starting point. i'd run it high pass if your setting will consent to you cross it over that low.

What is the backside deck speaker size...

Resolved Questions

Maintenance & Repairs
Buying & Sell
Auto Audio
Auto Makes
Commuting
Insurance
Registration
Safety
Motorcycles
Other Autos