1500 watt RMS mono amplifier
Brand: DB DRIVE
Model: SPA1500.1
Series: Speed Series
1500 watts RMS (a) 1 ohms
Class AB circuitry
Audiophile-grade components
Drivesink Technology
Enhanced dynamic performance
On-board low pass crossover
Built contained by cooling ventilation technology to keep the amp cool
Bass Boost 18db (a) 45hz
Lowpass Crossover 60hz - 150hz
1 x 750 (a) 2 ohms
Tri-mode Capability
Continuously mutable 12dB bass boost equalizer
Continuously variable 12dB per octave low-pass crossover
Direct connect integrated speaker and power wire terminal
DC-DC PWM power supply
Bipolar outputs
Buffered pre-amp input circuitry
direct connect integrated speaker and power wire terminals
DC-DC PWM power supply
Bipolar outputs
Buffered pre-amp input circuitry
steam management system
Way too much info...1 ohm stable means at 1 ohm, it will operate effectively...Most car audio speakers work on a 4ohm nouns...You can series them together and reduce the ohms to 1 ohm if you want... 2 (4ohm ) speakers will come down to 2 ohms when you series them together...With the power you have, I would not verbs about trying to reduce the ohms to 1...The closer to are to 0 ohms, the closer you are to a (Short)...Give yourself some buffer against a complete burn out of your amp...
1500 RMS (a) 1 ohms
750 RMS (a) 2 ohms
You can use two 400 watts RMS (a) 4 ohm subs within parallal - http://i81.photobucket.com/albums/j230/s...
or
Two 750 watt RMS 4 ohm DVCs wired like this - http://i81.photobucket.com/albums/j230/s...
or
One 750 watt RMS 2 ohm sub.
or...Well you get the thought.
More info here http://spkrbox1.spaces.live.com
Way too much info...1 ohm stable means at 1 ohm, it will operate effectively...Most car audio speakers work on a 4ohm nouns...You can series them together and reduce the ohms to 1 ohm if you want... 2 (4ohm ) speakers will come down to 2 ohms when you series them together...With the power you have, I would not verbs about trying to reduce the ohms to 1...The closer to are to 0 ohms, the closer you are to a (Short)...Give yourself some buffer against a complete burn out of your amp...
1ohm is never properly stable. That amp is NEVER going to properly be stable for more than a minute at 1ohm. Always focus on 2ohm, or 4ohm or in between for multiple woofers. Typically you can configure your subs to a 2ohm load, or close to it.
Your vehicle and what helpful of music you listen to really affect the kind of sub to get. I could recommend 20 different woofers for you, but until I know your motor and your main style of listening objects, I cant suggest anything.
What I would do is, if I was going for a single sub, I would find a woofer with a "dual voice coil" or "dvc" configuration surrounded by 4 ohm. so that both voice coils are 4 ohms a peice and you can wire them in series to creat a final 2ohm nouns.
If you go 2 woofers, find two single voice coil 4ohm woofers, or two dvc 2ohm woofers (or 2 8ohm). anything higher your typically going to involve a bigger amp or multiple amps.
Did you buy this amp yet? What kind of vehicle do you enjoy? What kind of music are do you MAINLY lisen to? Dont tell me everything any. What do you prefer? And tell me a budget you want to be within, and I can refer you to some of the best blow for your buck.
1ohm is never properly stable. That amp is NEVER going to properly be stable for more than a minute at 1ohm. Always focus on 2ohm, or 4ohm or in between for multiple woofers. Typically you can configure your subs to a 2ohm load, or close to it.
Your vehicle and what helpful of music you listen to really affect the kind of sub to get. I could recommend 20 different woofers for you, but until I know your motor and your main style of listening objects, I cant suggest anything.
What I would do is, if I was going for a single sub, I would find a woofer with a "dual voice coil" or "dvc" configuration surrounded by 4 ohm. so that both voice coils are 4 ohms a peice and you can wire them in series to creat a final 2ohm nouns.
If you go 2 woofers, find two single voice coil 4ohm woofers, or two dvc 2ohm woofers (or 2 8ohm). anything higher your typically going to involve a bigger amp or multiple amps.
Did you buy this amp yet? What kind of vehicle do you enjoy? What kind of music are do you MAINLY lisen to? Dont tell me everything any. What do you prefer? And tell me a budget you want to be within, and I can refer you to some of the best blow for your buck.
Answers: get 1ohm subs or you can cable 2 dvc subs rated at 2ohms to 1ohm.hope this helps
1500 RMS (a) 1 ohms
750 RMS (a) 2 ohms
You can use two 400 watts RMS (a) 4 ohm subs within parallal - http://i81.photobucket.com/albums/j230/s...
or
Two 750 watt RMS 4 ohm DVCs wired like this - http://i81.photobucket.com/albums/j230/s...
or
One 750 watt RMS 2 ohm sub.
or...Well you get the thought.
More info here http://spkrbox1.spaces.live.com
Way too much info...1 ohm stable means at 1 ohm, it will operate effectively...Most car audio speakers work on a 4ohm nouns...You can series them together and reduce the ohms to 1 ohm if you want... 2 (4ohm ) speakers will come down to 2 ohms when you series them together...With the power you have, I would not verbs about trying to reduce the ohms to 1...The closer to are to 0 ohms, the closer you are to a (Short)...Give yourself some buffer against a complete burn out of your amp...
Brand: DB DRIVE
Model: SPA1500.1
Series: Speed Series
1500 watts RMS (a) 1 ohms
Class AB circuitry
Audiophile-grade components
Drivesink Technology
Enhanced dynamic performance
On-board low pass crossover
Built contained by cooling ventilation technology to keep the amp cool
Bass Boost 18db (a) 45hz
Lowpass Crossover 60hz - 150hz
1 x 750 (a) 2 ohms
Tri-mode Capability
Continuously mutable 12dB bass boost equalizer
Continuously variable 12dB per octave low-pass crossover
Direct connect integrated speaker and power wire terminal
DC-DC PWM power supply
Bipolar outputs
Buffered pre-amp input circuitry
direct connect integrated speaker and power wire terminals
DC-DC PWM power supply
Bipolar outputs
Buffered pre-amp input circuitry
steam management system
Why do you entail a crossover for...
Way too much info...1 ohm stable means at 1 ohm, it will operate effectively...Most car audio speakers work on a 4ohm nouns...You can series them together and reduce the ohms to 1 ohm if you want... 2 (4ohm ) speakers will come down to 2 ohms when you series them together...With the power you have, I would not verbs about trying to reduce the ohms to 1...The closer to are to 0 ohms, the closer you are to a (Short)...Give yourself some buffer against a complete burn out of your amp...
Does hifonics craft angelic subs and component...
1500 RMS (a) 1 ohms
750 RMS (a) 2 ohms
You can use two 400 watts RMS (a) 4 ohm subs within parallal - http://i81.photobucket.com/albums/j230/s...
or
Two 750 watt RMS 4 ohm DVCs wired like this - http://i81.photobucket.com/albums/j230/s...
or
One 750 watt RMS 2 ohm sub.
or...Well you get the thought.
More info here http://spkrbox1.spaces.live.com
Way too much info...1 ohm stable means at 1 ohm, it will operate effectively...Most car audio speakers work on a 4ohm nouns...You can series them together and reduce the ohms to 1 ohm if you want... 2 (4ohm ) speakers will come down to 2 ohms when you series them together...With the power you have, I would not verbs about trying to reduce the ohms to 1...The closer to are to 0 ohms, the closer you are to a (Short)...Give yourself some buffer against a complete burn out of your amp...
What size of capacitor do I necessitate...
1ohm is never properly stable. That amp is NEVER going to properly be stable for more than a minute at 1ohm. Always focus on 2ohm, or 4ohm or in between for multiple woofers. Typically you can configure your subs to a 2ohm load, or close to it.
Your vehicle and what helpful of music you listen to really affect the kind of sub to get. I could recommend 20 different woofers for you, but until I know your motor and your main style of listening objects, I cant suggest anything.
What I would do is, if I was going for a single sub, I would find a woofer with a "dual voice coil" or "dvc" configuration surrounded by 4 ohm. so that both voice coils are 4 ohms a peice and you can wire them in series to creat a final 2ohm nouns.
If you go 2 woofers, find two single voice coil 4ohm woofers, or two dvc 2ohm woofers (or 2 8ohm). anything higher your typically going to involve a bigger amp or multiple amps.
Did you buy this amp yet? What kind of vehicle do you enjoy? What kind of music are do you MAINLY lisen to? Dont tell me everything any. What do you prefer? And tell me a budget you want to be within, and I can refer you to some of the best blow for your buck.
1996 Maxima power antenna out of commission....
I suggest that you procure some kicker L7's. 2 12" kicker l7's.1ohm is never properly stable. That amp is NEVER going to properly be stable for more than a minute at 1ohm. Always focus on 2ohm, or 4ohm or in between for multiple woofers. Typically you can configure your subs to a 2ohm load, or close to it.
Your vehicle and what helpful of music you listen to really affect the kind of sub to get. I could recommend 20 different woofers for you, but until I know your motor and your main style of listening objects, I cant suggest anything.
What I would do is, if I was going for a single sub, I would find a woofer with a "dual voice coil" or "dvc" configuration surrounded by 4 ohm. so that both voice coils are 4 ohms a peice and you can wire them in series to creat a final 2ohm nouns.
If you go 2 woofers, find two single voice coil 4ohm woofers, or two dvc 2ohm woofers (or 2 8ohm). anything higher your typically going to involve a bigger amp or multiple amps.
Did you buy this amp yet? What kind of vehicle do you enjoy? What kind of music are do you MAINLY lisen to? Dont tell me everything any. What do you prefer? And tell me a budget you want to be within, and I can refer you to some of the best blow for your buck.
How do I play my Sansa e260r...
Answers: get 1ohm subs or you can cable 2 dvc subs rated at 2ohms to 1ohm.hope this helps
1500 RMS (a) 1 ohms
750 RMS (a) 2 ohms
You can use two 400 watts RMS (a) 4 ohm subs within parallal - http://i81.photobucket.com/albums/j230/s...
or
Two 750 watt RMS 4 ohm DVCs wired like this - http://i81.photobucket.com/albums/j230/s...
or
One 750 watt RMS 2 ohm sub.
or...Well you get the thought.
More info here http://spkrbox1.spaces.live.com
Way too much info...1 ohm stable means at 1 ohm, it will operate effectively...Most car audio speakers work on a 4ohm nouns...You can series them together and reduce the ohms to 1 ohm if you want... 2 (4ohm ) speakers will come down to 2 ohms when you series them together...With the power you have, I would not verbs about trying to reduce the ohms to 1...The closer to are to 0 ohms, the closer you are to a (Short)...Give yourself some buffer against a complete burn out of your amp...
Resolved Questions
- JL AUDIO W6v2 how you similar to...
- 900w (2200w max) SPL amp running 2...
- What to do when the pallid dimmers...
- 1ohm electrical system please minister to !!?
- What do you meditate of t his...
- Would it be apposite or bleak to...
- How do I hook up an iPod...
- Need a cheap hookup for a mp3...
- What amp should i use?
- How do you fit the ends of...