2000 Dodge Ram pickup Brake Help?

I'm getting brake fluid out of the brake line for the front, but none for the backside brakes. Could this be the rear ABS sensor or possibly the ABS control module or could it be the seal for the rear brakes contained by the master cylinder. When the brakes are applied, I can hear fluid pressing back up and through the master cylinder.

Need help out identify this vehicle fragment!?



Answers:    that almost sounds approaching a master cyl. leak. however, yes the ABS controller can do that as resourcefully. one thing you could do is break free the file on the master that goes to the reverse brakes and see in you are getting any pressure in attendance. if you are not getting pressure there next you will need a master cyl. if you are you will enjoy to follow the line down and check adjectives the way stern.

Do you resembling your 2005-2008 Volkswagon Bug?...


Master cylinder is more than likely desperate. Try this: get supporter in the driver form, tell him to push on brake pedal and do not consent to up. Open the brake line at the master cylinder (crack it open) and see if fluid comes out. If no replace the MC! The backside line is for the backside brakes!

Resolved Questions

Copyright © 2008-2010 All rights reserved. YesImAuto.com