HELP 1988 dodge dynasty le 3.0 6 cyl won't start?

I have changed the ecm computer and It Still won't start. when i disconnect the coil and use a hot wire to it i can achieve it to start using a little starting fluid.but when i hook it back into the electrical system harness i get no fire from the coil. can anyone tell me what i'm missing

How long have your ford taurus last?

Spark at the plugs? How about injector pulse? If you have spark but no pulse, check the harness on the rear legs of the intake, under the air filter hoses. They resembling to make life unyielding for us. If you have pulse, how about fuel PSI? If not, check the pump surrounded by tank. Try to hit it(tank) while someone trys to start it. If it starts, FUEL PUMP TIME!! Have fun and good luck!

Who like the Honda Element?


you may enjoy a bad ignition switch on it ,that would explain why its not getting power to the coil with the knob on,check that ,those was popular for going out ,that or a fuse would be the only point that would cause a lose of power to it,or a burnt telecommunication in the harness somewhere,good luck beside it,

Remote starter (good or bad)?



Answers:    nouns like you need a ignition module, it's not sending signal to the coil.
you may enjoy a bad ignition switch on it ,that would explain why its not getting power to the coil with the knob on,check that ,those was popular for going out ,that or a fuse would be the only point that would cause a lose of power to it,or a burnt telecommunication in the harness somewhere,good luck beside it,

Anyone here on YesImAuto.com own a 6...


Resolved Questions

Copyright © 2008-2010 All rights reserved. YesImAuto.com