does year one still make thir crate 440 anymore? I can't find it on their website. if so would you post a connection?
Answers: Looks like it be only offered for a few months. The part of a set number was "CR440ET2" and is no longer found on the site. I guess it be too good of a contract to last.
I put nearly $3500 in mine when I rebuild it. I have more HP, but this be a heck of a deal:
$4495
Engine Specifications:
·Horsepower- 420+
·Torque- 470+ ft/lbs
·Compression ratio- 9.0:1
·Dyno-tested: Yes, includes harmonic balancer
·Dyno sheet: Included next to engine's output
·Vacuum produced: 14hg (a) 800RPM
·Recommended fuel- 92 octane
·Max recommended RPM- 5800
·Block- Seasoned iron
·Crankshaft- Cast iron-internally balanced
·Pistons- Hypereutectic
·Connecting rods- Stock reconditioned
·Camshaft- Hydraulic flat-tappet
Valve pull:.(int/ext) 480"/496"
Duration (a) .050" (int/exh): 238deg/246deg
·Rocker arms- 1.5:1 ratio
·Cylinder heads- Ported with hardened spaces
·Valves- 2.08 int/1.74 exh
·Valve springs: Single spring with damper
·Engine fasteners- High tensile strength
i haven't see it either ,i be looking for someone else a few days ago,i did have one of their 360,s until a daytime ago,now its speck metal,but i haven't seen the 440 on the site,if i find it i,ll post it.perfect luck.
Why does my supercharger for my 2000...
Answers: Looks like it be only offered for a few months. The part of a set number was "CR440ET2" and is no longer found on the site. I guess it be too good of a contract to last.
I put nearly $3500 in mine when I rebuild it. I have more HP, but this be a heck of a deal:
$4495
Engine Specifications:
·Horsepower- 420+
·Torque- 470+ ft/lbs
·Compression ratio- 9.0:1
·Dyno-tested: Yes, includes harmonic balancer
·Dyno sheet: Included next to engine's output
·Vacuum produced: 14hg (a) 800RPM
·Recommended fuel- 92 octane
·Max recommended RPM- 5800
·Block- Seasoned iron
·Crankshaft- Cast iron-internally balanced
·Pistons- Hypereutectic
·Connecting rods- Stock reconditioned
·Camshaft- Hydraulic flat-tappet
Valve pull:.(int/ext) 480"/496"
Duration (a) .050" (int/exh): 238deg/246deg
·Rocker arms- 1.5:1 ratio
·Cylinder heads- Ported with hardened spaces
·Valves- 2.08 int/1.74 exh
·Valve springs: Single spring with damper
·Engine fasteners- High tensile strength
Heater within my Honda Odyssey 2001 Ex...
i haven't see it either ,i be looking for someone else a few days ago,i did have one of their 360,s until a daytime ago,now its speck metal,but i haven't seen the 440 on the site,if i find it i,ll post it.perfect luck.
Resolved Questions
- Can someone donate me some sites to...
- Whats the difference between distinguished touring adjectives...
- How to adjust 95 VW stand still...
- I call for to know the owner...
- Why are little 15 year antiquated Honda...
- Cold Start Problems on a 1994 Ford...
- Which is better? Toyota Corolla or Honda...
- More HP for my S10?
- Can my vehicle use e85 gas?
- Does Acetone amend on gas mileage on...